toleda

Moderator

7.1+2 Channel HD Audio Codec with Content Protection: General Description: The ALC898 is a multi-channel High Definition Audio Codec with Realtek proprietary loss-less content protection technology that protects pre-recorded content while still allowing full-rate audio enjoyment from DVD audio, Blu-ray DVD, or HD DVD discs.
Need AUDACITY help please. Discussion in 'other software & services' started by MICRO, Nov 9, 2008. Realtek HDA primary input or Realtek HD Digital input. On Windows XP systems with RealTek audio hardware and up to date drivers, Audacity may not show the mixer drop down control or it may be disabled.

Joined: May 20, 2010

Messages: 24,462

Motherboard: Asus Maximus VII Impact

CPU: Core i7-4770K

Graphics: RX 560 + HD4600

Mac: , ,

Classic Mac: , ,

Mobile Phone

With RealTek open, the driver updated and all, I took out the mic and plugged it into the back of my computer (the other mic spot) and then a popup came up from RealTek (New jack plugged in) so I. Tonymacx86.com: Home of the CustoMac Buyer’s Guide, iBoot, MultiBeast, UniBeast, and the world’s most helpful #hackintosh #mac #osx support community.

Audio - Realtek ALC AppleHDA [Guide]
Realtek ALC/Desktop: 269*, 283*, 885, 887, 888, 892, 898 and 1150 on board audio
(* BRIX/NUC only)
Supports macOS/OS X: 10.12, 10.11, 10.10, 10.9 and 10.8
This thread is deprecated Realtek Hda Primary Input Driver For Mac

Realtek Hda Primary Input Driver For Mac

, see AppleHDA Realtek Audio.
Enables OS X Realtek ALC on board audio for Intel desktop motherboards. El Capitan requires native AppleHDA.kext. Codec specific script edits binaries and installs specific files. Depending on user requirements, select appropriate Realtek ALC Installation Method.
Recommendations (native AppleHDA and Clover required)

MultiBeast: determine installed audio codec before running MultiBeast.
cloverALC: detects audio codec, verifies audio configuration and installs codec specific files.

Change Log
v3.3: 7/29/17 - X299 Audio Support, see Unsupported/Non-working/Non native ../2. X299
v3.2: 5/10/17 - 200 Series/Kaby Lake Audio Support, see below (temporary)
v3.1: 3/6/17 - ALC1220 Beta, see I. AppleHDA Realtek Scripts/4. cloverALC/Beta ..
v3: 8/17/16 - Initial 10.12/Sierra Support/cloverALC, see II. Realtek ALC AppleHDA Scripts
v2.5 - 4/8/16 - x99/AppleHDA.kext/10.11 support, see 2. X99/Intel High Definition Audio
v2.4 -1/25/16 - Uninstall Realtek ALC AppleHDA added
v2.3 - 1/18/16 - Audio/ALC Injection verification (Tools 3.)
v2.2 - 12/14/15 - audio_pikeralpha-110 (Clover version of Piker Alpha/AppleHDA8Series.sh)
v2.1 - 11/28/15 - MultiBeast 8, 100 Series/Skylake support (see Unsupported/Non-working Realtek ALC AppleHDA/1. 100 Series, below) and X99 update (see Unsupported/Non-working Realtek ALC AppleHDA/2. X99, below) Realtek Hda Primary Input Driver For Mac

v2.0 - 7/10/2015: El Capitan/10.11.x Update, initial Public Beta support with audio_cloverALC-110 and audio_realtekALC-110 (v2.0 released)
v1.5 - 1/8/2015: audio_cloverALC-100/audio_realtekALC-100 (v1.0.4) release; 887/888 legacy detection, ALC1150 patch fix, Clover/Legacy support, bug fixes
v1.4 - 12/26/2014: Realtek ALC AppleHDA Guides updated, see More Information, below
v1.3 - 11/29/2014: MultiBeast 7.1/Optional HDAEnabler (kext) -> Audio ID: 1 and 2 added
v1.2 - 11/29/2014: BRIX/ALC269, BRIX Pro/ALC283 and NUC/ALC283 Support, see Note 5.
v1.1 - 11/15/2014: x99 audio - Deprecated - 11/28/15
v1.0 - 10/15/2014: Yosemite/10.10.x, Mavericks/10.9.x and Mountain Lion/10.8.x
10.12 Only, see Quick Fix: 200 Series/Kaby Lake Audio

200 Series/Kaby Lake Audio Support (10.12.4 through 10.12.6)
X299 Audio Support (10.12.6)

Before You Install Audio

All methods/all macOS versions, 10.8 and newer, see Before You Install Audio/Post #1
MultiBeast 8 and newer. 10.11 and newer, Before You Install Audio/MultiBeast/Post #2

Realtek ALC Installation Methods

Audio codec/ALC Injection? audio_codecdetect.command.zip (Select View Raw, double click)
Native AppleHDA.kext? Restore native AppleHDA [Guide].pdf
Select one method appropriate to your system configuration (Clover patched or binary patched)
1. all methods work; if no audio , see Troubleshooting/Problem Reporting (below)
2. if the method does not work, no method will work
Uninstall Realtek ALC AppleHDA, below
1. remove method to install a different method

I. MultiBeast Realtek ALC AppleHDA (MultiBeast 8 and newer, same as cloverALC method)

Download Multibeast
Enter Password
MultiBeast/Drivers > Audio > Realtek ALCxxx > √ ALCxxx
1. Clover (config.plist/Devices/Audio/Inject/1 - Audio ID: 1, default)
2. Select Codec √
  - ALC269 (BRIX only)
  - ALC283 (BRIXPro and NUC only)
  - ALC885/889a
  - ALC887/888b Legacy v100202
  - ALC887/888b Current v100302
  - ALC888 Legacy v100202
  - ALC888
  - ALC889
  - ALC892
  - ALC898
  - ALC1150
3. As appropriate √
  - Optional 100/200 Series Audio (200 series, see, 10.12 Only above)
  - Optional 3 Port (5.1) Audio (Audio ID: 2)
  - Optional HD 3000/HD 4000 HDMI Audio (Audio ID: 3)
MultiBeast/Build/Install
Success, restart
If not, see Troubleshooting/Problem Reporting (below)

II. Realtek ALC AppleHDA Scripts

Download script (select one script, Download/View Raw)
1. audio_cloverALC.command.zip
  - patch kernel cache
  - no edits to any native AppleHDA.kext file
  - 2-4 files added to Resources folder
2. audio_realtekALC.command.zip (do not install with Clover bootloader)
  - patch kext in place
  - edits AppleHDA.kext binaries and adds files
  - run script after Software Update
3. audio_pikeralphaALC.command.zip
  1. patch kernel cache
  2. native AppleHDA.kext (signed)
  3. installs AppleHDAxxx.kext (ex., L/E/AppleHDA892.kext)
  4. not supported: ALC269 and ALC283
4. cloverALC/Beta/ALC1220/macOS 10.12.3 and newer/both versions supported
  1. audio_cloverALC-1220-120.command.zip
    1. ALC1220: 200 Series motherboards with 108 db SNR (device_id: 0x1168)
      - S1220A/Asus/ROG Strix Z2xx with 113 db SNR
    2. ALC1220S: premium 200 Series motherboards (device_id: 0x1220)
      - S1220/Asus/ROG Maximus IX .. with i2S output
      - 1220/Gigabyte/Z270X-.. with 120 db SNR and Smart Headphone Amp
  2. Installation, same as 2-6, below, except:
    1. Additional questions:
      1. Confirm 200 Series audio (y/n), y
      2. Confirm ALC1200/S Beta files (y/n), y
Double Click Downloads/audio_. . .ALC-..command
Enter Password
Answer questions (y/n)
Success, restart
If not, see Troubleshooting/Problem Reporting (below)

III. Additional AppleHDA Realtek Methods

vit9696/AppleALC - AppleALC
1. Downloads
  1. AppleALC_v1.1.2 or newer
2. Install Downloads/AppleALC.kext and Lilu.kext to EFI/CLOVER/kexts/Other
3. Restart
4. Chameleon, Clover, Osmosis, others
Piker-Alpha AppleHDA8series Script
1. Download script (see README)
  1. Piker-Alpha/AppleHDA8Series.sh (10.10 working, 10.11TBA, 10.11 fix, see below)
    - patch alias
    - no edits to any native AppleHDA.kext file
    - installs AppleHDAxxx.kext (ex., S/L/E/AppleHDA892.kext)
2. Terminal (select one)
  1. ALC audio/Clover patch:
    - $ ./AppleHDA8Series.sh
  2. ALC audio:
    - $ ./AppleHDA8Series.sh -b AppleHDA
  3. ALC audio and HD4600 HDMI audio:
    - $ ./AppleHDA8Series.sh -b AppleHDA -b AppleHDAController
3. Enter Password
4. .. choose desired codec: (1-7)
5. .. layout-id (y/n)
6. Answer questions (y/n)
7. 10.11 fix, see Credit/lisai9093 (below)
8. Success, restart
9. If not, see Troubleshooting/Problem Reporting (below)
10. Chameleon, Clover, Osmosis, others

Requirements

OS X versions supported:
1. Seirra/10.12+, see Notes 1 and 2, below
2. El Capitan/10.11+, see Notes 1 and 2, below
3. Yosemite/10.10+, see Notes 1 and 2, below
4. Mavericks/10.9+
5. Snow Leopard/10.8+
Realtek ALC, one of the following Device_ID - Codec Name
1. Supported motherboard on board audio codecs
  - 10ec0269 - ALC269
  - 10ec0283 - ALC283
  - 10ec0885 - ALC885/ALC889a
  - 10ec0887 (v100202 and v100302) - ALC887/ALC888b
  - 10ec0888 (v100202 and v100302) - ALC888/ALC888s
  - 10ec0889 - ALC889
  - 10ec0892 - ALC892
  - 10ec0899 - ALC898
  - 10ec0900 - ALC1150
  - 10ec1168 - ALC1220A
  - 10ec1220 - ALC1220
2. Verification, see Notes 3, below
Supported Audio-IDs (Audio_ID = layout-id), select one
1. Audio IDs
  - Audio_ID: 1 - 3/5/6 port Realtek ALC onboard audio (default)
    - Inputs: Pink (motherboard/mb and front panel/fp), Blue (mb)
    - Outputs: Green (mb and fp), Orange (mb), Black (mb), Optical
  - Audio_ID: 2 - 3 port (5.1) Realtek ALC onboard audio
    - Inputs: Pink (fp)
    - Outputs: Green (mb and fp), Orange (Pink/mb), Black (Blue/mb), Optical
  - Audio_ID: 3 - 3/5/6 port Realtek ALC onboard audio with
    - HD3000/HD4000 HDMI audio only
    - Inputs: Pink (mb and fp), Blue (mb)
    - Outputs: Green (mb and fp), Black (mb), Optical
2. Details
  - Audio_IDs: 1 and 2 support analog 5.1 surround sound, 3 does not
  - Audio_IDs: 1, 2 and 3 require HDMI audio dsdt edits/ssdts for HDMI audio
Audio_ID Injection (Select one method)
1. Supported Realtek ALC Injection methods, see toleda/audio_ALCInjection
  - HDEF/kext/No dsdt/HDAEnabler_.kext = Audio_ID (Deprecated)
  - HDEF/dsdt/layout-id = Audio_ID,
  - HDEF/ssdt/layout-id = Audio_ID, see ssdt_hdef
  - HDEF/Clover/Config.plist/Devices/Audio/Inject = Audio_ID
  - HDEF/Chameleon Installer/Customize/Setting/ (Deprecated)
    - HDAEnabler = Yes
    - HDEF Layout = 01000000 or 02000000 or 03000000
2. Verification, see Notes 4, below

Notes

OS X System Protection
1. Sierra/10.12.x (Disable SIP, Mandatory)
  - config.plist/RtVariables/CsrActiveConfig/0x3
2. El Capitan/10.11.x (Disable SIP, Mandatory)
  - config.plist/RtVariables/CsrActiveConfig/0x3
3. Yosemite/10.10.x (Allow unsigned kexts)
  - Add (Mandatory): kext-dev-mode=1
  - Remove Kernel Flags/npci=0x3000
AppleHDA.kext version matters
1. AppleHDA.kext can be the same as or earlier than the installed OS X version
2. AppleHDA.kext does not work if newer than the installed OS X version
3. For MultiBeast/OS X/AppleHDA.kext version table
Audio Codec Verification/DPCIManager see Tools 2.
1. See Status/Codec ID/Revision, note Codec ID
2. Verify Requirements/2. Realtek ALC/1. Supported audio codecs, above
Audio_ID verification/IORegistryExplorer see Tools 3.
1. Search: HDEF
2. Locate: layout-id (right pane, scroll down)
3. Verify:
  - <01 00 00 00> or
  - <02 00 00 00> or
  - <03 00 00 00>
BRIX/ALC269, BRIX Pro/ALC283 and NUC/ALC283 Support
1. Installation methods
  - MultiBeast
  - realtekALC/patch in place
  - cloverALC/Clover patched
2. Audio Devices
  - ALC269 - BRIX/Headphones and SPDIF out
  - ALC283 - BRIX Pro and NUC Headphones/Microphone (iPhone headset is not supported)
  - HDMI audio with dsdt edits or ssdt: see HDMI Audio AppleHDA

Unsupported/Non-working/Non native Realtek ALC AppleHDA

100/200 Series/Intel High Definition Audio (Workaround requires 1, 2, 3, 4 and 5)
1. 200 Series support: macOS/10.12.4 or newer
2. Rename dsdt/HDAS to HDEF (Select one method)
  1. MultiBeast 8.2 and newer
    - Drivers > Audio > RealtekALCxxx > 100 Series Audio
    - Disables HDEF/HDMI audio ssdts
  2. Clover: Download config-audio_cloverALC-100series.plist.zip
    - Add config.plist/ACPI/DSDT/Patches/Rename HDAS to HDEF
    - Disables HDEF/HDMI audio ssdts
  3. ssdt injection (Any bootloader. Select Audio ID and install)
    - Audio ID: 1, ssdt_hdef-1-100-hdas.zip
    - Audio ID: 2, ssdt_hdef-2-100-hdas.zip
3. Restart
4. Install Realtek ALC Audio (see Realtek ALC Installation Methods)
5. Restart
X299/Intel High Definition Audio (Workaround requires 1, 2, 3 and 4), 10.12+/credit BJY1991
1. Rename dsdt/CAVS to HDEF (Select one method)
  1. Clover: Download/config-audio_cloverALC-x299.plist.zip
    - Add config.plist/ACPI/DSDT/Patches/Item 0 (Rename CAVS to HDEF)
  2. ssdt injection (any bootloader):
    - Audio ID: 1, install ssdt_hdef-1-x299-cavs.zip
2. Restart
3. Install Realtek ALC Audio (see Realtek ALC Installation Methods)
  1. X299/10.12.x only HD Audio device_id (Select one method)
    - Clover: Download/config-audio_cloverALC-x299.plist.zip
    - Add config-audio_cloverALC-x299.plist/KernelAndKextPatches/KextsToPatch/Item 0 (Controller patch)
    - Other methods: see Quick Fix: 200 Series/Kaby Lake Audio/Post #1
4. Restart
X99/Intel High Definition Audio (Workaround requires 1, 2, 3, 4 and 5), 10.11+/credit bOLEMO
1. Rename dsdt/ALZA to HDEF (Select one method)
  1. Clover: Download/config-audio_cloverALC-x99.plist.zip
    - Add config.plist/ACPI/DSDT/Patches/Rename ALZA to HDEF
  2. ssdt injection (any bootloader):
    - Audio ID: 1, install ssdt_hdef-1-x99_alza.zip
2. Restart
3. Install Realtek ALC Audio (see Realtek ALC Installation Methods)
4. Add x99 HD Audio device_id (Select one method)
  1. Clover: Download/config-audio_cloverALC-x99.plist.zip (Select one, appropriate version)
    - Add config.plist/KernelAndKextPatches/KextsToPatch/10.10-10.11+x99-ALC-Onboard-Audio
    - Add config.plist/KernelAndKextPatches/KextsToPatch/110.9.4-10.9.5-x99-ALC-Onboard-Audio
  2. Patched AppleHDA.kext (RealtekALC)
    - Double Click/audio_alc_x99-hda-100_patch.command.zip
5. Restart
887_v100101 and earlier
1. Workaround: try 887 Legacy (v100201)
888_v100101 and earlier
1. Workaround: try 888 Legacy (v100201)
Asus P67H67 3xxx BIOS: Phantom codec
1. Workaround: 2xxx BIOS downgrade, 7/8 Series motherboard upgrade
MSI motherboards, pre Sandy Bridge
1. Workaround: 6/7/8 Series motherboard upgrade
AC97 (Front Panel)
1. Workaround: HD Audio Front panel

Realtek ALC Speakers

Audio ID: 1 and 3, match speaker connector color to same motherboard/case port color
Audio ID: 2 (3 port motherboard audio)
- Plug black connector into blue motherboard port for rear speakers
- Plug green connector into green motherboard port for front speakers
- Plug orange connector into pink motherboard port for center/sub speakers
- Front panel: Match connector color to same case port color

Optional Installs

5.1/Surround Sound, see Surround Sound Realtek ALC AppleHDA
Connect Audio Input to Audio Output
- Line In - http://www.rogueamoeba.com/freebies/

More Information - toleda/audio_ALC_guides

Realtek ALC AppleHDA.pdf
- ex., Audio_ID Configurations, System Preferences/Sound/Output, System Information/Audio/Intel High Definition Audio
Customization.pdf
- ex., Manual speaker and headphone selection, Substitute SPDIF-2 Wire Output
Surround Sound.pdf
- ex,. Players, configurations, Analog, Optical, HDMI, USB

No Audio Devices.pdf
No Audio After Sleep/Wake.pdf
No Sound.pdf

Previous MultiBeast Editions - Patched AppleHDA.kext (match OS X/MultiBeast version)
Note: MultiBeast must be run after each Software update to restore Realtek ALCxxx audio

Yosemite/10.10.5/MultiBeast 7.5.0, Downloads - tonymacx86.com

MultiBeast/Drivers/Audio/Realtek ALCxxx
1. MultiBeast/Drivers > Audio > Realtek ALCxxx > √ ALC
  1. Clover (config.plist/Devices/Audio/Inject/1)
    1. plus √ Optional EFI Installed Bootloader Support
  2. Chameleon
    1. plus √ Optional HDAEnabler > Audio ID: 1 (if required)
2. MultiBeast/Build/Install
3. Enter Password
4. Restart

Mavericks/10.9.5/MultiBeast 6.5.1, see Downloads - tonymacx86.com

MultiBeast/Drivers/Audio/Realtek ALCxxx
1. MultiBeast/Select:
  1. Clover (config.plist/Devices/Audio/Inject/1 (or 2, or 3)
    1. Drivers > Audio > Realtek ALCxxx > With DSDT √ ALC
  2. Chameleon (installs HDAEnabler1.kext)
    1. Drivers > Audio > Realtek ALCxxx > Without DSDT √ ALC
2. MultiBeast/Install
3. Enter Password
4. Restart

Mountain Lion/10.8.5/MultiBeast 5.5.5, see Downloads - tonymacx86.com
MultiBeast Archives (all other versions), Downloads - tonymacx86.com

Previous OS X Versions
Uninstall Realtek ALC AppleHDA

MultiBeast 8.0+, remove:
1. S/L/E/AppleHDA.kext and install the native AppleHDA.kext
  1. or S/L/E/AppleHDA.kext/Contents/Resources/layout1.zml.zlib, layout2.zml.zlib, layout3.zml.zlib, Platforms.ml.zlib
2. config.plist/../KextsToPatch/AppleHDA (3x)
3. L/E/realtekALC.kext
cloverALC, remove:
1. Install native AppleHDA.kext with a kext installer (KextBeast)
  1. or S/L/E/AppleHDA.kext/Contents/Resources/layout1.zml.zlib, layout2.zml.zlib, layout3.zml.zlib, Platforms.zml.zlib
2. config.plist/../KextsToPatch/AppleHDA (3x)
3. EFI/CLOVER/kexts/10.xx or other/realtekALC.kext
pikeralphaALC, remove:
1. L/E/AppleHDAxxx.kext
2. config.plist/../KextsToPatch/AppleHDA (2x)
realtekALC, remove:
1. S/L/E/AppleHDA.kext and install the native AppleHDA.kext
AppleALC.kext, remove:
1. EFI/CLOVER/kexts/10.xx or other/AppleALC.kext
2. EFI/CLOVER/kexts/10.xx or other/Lilu.kext
Piker-Alpha AppleHDA8Series, remove:
1. S/L/E/AppleHDAxxx.kext or L/E/AppleHDAxxx.kext
MultiBeast/pre 8.0, remove:
1. S/L/E/AppleHDA.kext and install the native AppleHDA.kext

Tools

IORegistry Explorer (choose one)
Audio/ALC Injection: audio_codecdetect.command.zip
Kext Install utilities, i.e., Kext Wizard, Kext Utility, DPCIManager, etc.

Troubleshooting/Problem Reporting (Posts to this thread reporting problems will be removed, post to the thread linked, do not post a new thread)
Credit
THe KiNG [HOW TO] Patch AppleHDA - Knowledge Base - Project OS X Forums (archived).
PikeRAlpha New style of AppleHDA.kext patching for Yosemite Pike's Universum
abxite http://applelife.ru/..06/#post-353647
lisai9093 AppleHDA for El Capitan discussion
OLEMO, post #196, El Capitan: Realtek ALC AppleHDA Audio
RevoGirl

Your Macbook Pro is a 13' 2010 model as listed in How to identify MacBook Pro models - Apple Support.

Ff Input Driver For Virtualdub

According to System requirements to install Windows on your Mac via Boot Camp - Apple Support, your MBP needs Boot Camp Support Software 4.0.4033 and as mentioned in

Zoltrix driver for mac. We recommend you to try the top 1 solution,.

Realtek Hda Primary Input Driver For Mac

MacBook (13-inch, Late 2006)
MacBook (13-inch, Mid 2007)
MacBook (13-inch, Late 2007)
MacBook (13-inch, Early 2008)
MacBook (13-inch, Late 2008)
MacBook (13-inch, Early 2009 & Mid 2009)
MacBook (13-inch, Late 2009) *
MacBook (13-inch, Mid 2010) *
MacBook Air (13-inch, Early 2008)
MacBook Air (13-inch, Late 2008 & Mid 2009)
MacBook Air (11-inch & 13-inch, Late 2010) *
MacBook Pro (15-inch & 17-inch, Core 2 Duo)
MacBook Pro (15-inch & 17-inch, 2.2 & 2.4GHz)
MacBook Pro (15-inch & 17-inch, Early 2008) *
MacBook Pro (15-inch, Late 2008) *
MacBook Pro (17-inch, Early 2009 & Mid 2009) *
MacBook Pro (15-inch, Early 2009) *
MacBook Pro (13-inch and 15-inch, Mid 2009) *
MacBook Pro (13-inch,15-inch, and 17-inch, Mid 2010)
MacBook Pro (13-in, 15-inch, and 17-inch, Early 2011 & Late 2011)
Mac Pro (Mid 2006)
Mac Pro (Early 2008) *
Mac Pro (Early 2009)
Mac Pro (Early 2007)
Mac Pro (Mid 2010)
Mac Pro (15-inch and 17-inch, 2.2 & 2.4GHz)
Mac mini (Mid 2007)
Mac mini (Early 2009 & Late 2009)
Mac mini (Mid 2010) *
iMac (17-inch, Late 2006)
iMac (20-inch, Late 2006)
iMac (24-inch, Late 2006)
iMac (20-inch & 24-inch, Mid 2007)
iMac (20-inch & 24-inch, Early 2008)
iMac (20-inch, Early 2009 & Mid 2009)
iMac (21.5-inch & 27-inch, Late 2009) *
iMac (27-inch, Late 2009) *
iMac (21.5-inch, Mid 2010) *
iMac (27-inch, Mid 2010)
iMac (21.5-inch, Mid 2011 & Late 2011)
iMac (27-inch, Mid 2011)

Realtek Hda Primary Input Driver For Macbook Pro

all these drivers support Windows 7, 32 bit

* drivers that support Windows 7, 32 and 64 bit

You can download the drives to a USB2 flash drive and Boot Camp: Install or repair Boot Camp drivers.

If you have used anything other than a standard BC Assistant to install Windows, you will run into audio and GPT issues. For example using Windows EFI Boot will not work properly.

Realtek Audio Driver Mac

Mar 21, 2015 3:40 PM